puai_dispatch/dispatch/dispatch_process.cpp

//
// Created by huli on 2021/3/22.
//

#include "dispatch_process.h"
#include "../system/system_communication.h"
#include "../dispatch/dispatch_manager.h"

Dispatch_process::Dispatch_process()
{
	m_dispatch_process_status = DISPATCH_PROCESS_STATUS_UNKNOW;
	m_dispatch_process_type = DISPATCH_PROCESS_TYPE_UNKNOW;
	m_dispatch_source = 0;
	m_dispatch_destination = 0;
	m_wheel_base = 0;

//	m_dispatch_process_catcher_motion = CATCHER_MOTION_UNKNOW;
//	m_dispatch_process_carrier_motion = CARRIER_MOTION_UNKNOW;
}

Dispatch_process::~Dispatch_process()
{
	Dispatch_process_uninit();
}

//初始化, 就把主控发送的请求传入即可.
Error_manager Dispatch_process::Dispatch_process_init(message::Dispatch_request_msg &dispatch_request_msg)
{
	if ( dispatch_request_msg.base_info().has_timeout_ms() )
	{
		m_timeout_ms = dispatch_request_msg.base_info().timeout_ms() - DISPATCH_PROCESS_ATTENUATION_TIMEOUT_MS;
	}
	else
	{
		m_timeout_ms = DISPATCH_PROCESS_TIMEOUT_MS - DISPATCH_PROCESS_ATTENUATION_TIMEOUT_MS;
	}
	m_command_key = dispatch_request_msg.command_key();
	m_start_time = std::chrono::system_clock::now();

	if ( dispatch_request_msg.dispatch_motion_direction() == message::E_STORE_CAR )
	{
		m_dispatch_process_type = DISPATCH_PROCESS_STORE;
		m_dispatch_source = dispatch_request_msg.terminal_id() + PASSAGEWAY_ID_BASE ;
		m_dispatch_destination = dispatch_request_msg.parkspace_info().parkingspace_index_id() + PARKSPACE_ID_BASE;
		Common_data::copy_data(m_parkspace_information, dispatch_request_msg.parkspace_info());
		Common_data::scaling(m_parkspace_information, 1000);
		Common_data::copy_data(m_car_measure_information, dispatch_request_msg.locate_information());
		Common_data::scaling(m_car_measure_information, 1000);
		m_wheel_base = m_car_measure_information.car_wheel_base;
	}
	else if( dispatch_request_msg.dispatch_motion_direction() == message::E_PICKUP_CAR )
	{
		m_dispatch_process_type = DISPATCH_PROCESS_PICKUP;
		m_dispatch_source = dispatch_request_msg.parkspace_info().parkingspace_index_id() + PARKSPACE_ID_BASE;
		m_dispatch_destination = dispatch_request_msg.terminal_id() + PASSAGEWAY_ID_BASE ;
		Common_data::copy_data(m_parkspace_information, dispatch_request_msg.parkspace_info());
		Common_data::scaling(m_parkspace_information, 1000);
		m_wheel_base = m_parkspace_information.car_information.car_wheel_base;
	}
	else
	{
		m_dispatch_process_type = DISPATCH_PROCESS_TYPE_UNKNOW;
		return Error_manager(Error_code::PARAMETER_ERROR, Error_level::MINOR_ERROR,
							 "  Dispatch_process::Dispatch_process_init ERROR ");
	}

	if ( m_wheel_base < 1000 )
	{
		return Error_manager(Error_code::PARAMETER_ERROR, Error_level::MINOR_ERROR,
							 "  m_wheel_base < 1000 ERROR ");
	}
	m_dispatch_request_msg = dispatch_request_msg;
	m_dispatch_process_status = DISPATCH_PROCESS_CREATED;
	return Error_code::SUCCESS;
}

//反初始化
Error_manager Dispatch_process::Dispatch_process_uninit()
{
	if ( mp_catcher_task.get() != NULL )
	{
		//收回任务
		mp_catcher_task->set_task_statu(Task_Base::Task_statu::TASK_WITHDRAW);
		//释放设备和任务单的指针
		mp_catcher_task.reset();
		mp_catcher.reset();
	}
	if ( mp_carrier_task.get() != NULL )
	{
		//收回任务
		mp_carrier_task->set_task_statu(Task_Base::Task_statu::TASK_WITHDRAW);
		//释放设备和任务单的指针
		mp_carrier_task.reset();
		mp_carrier.reset();
	}
	if ( mp_passageway_task.get() != NULL )
	{
		//收回任务
		mp_passageway_task->set_task_statu(Task_Base::Task_statu::TASK_WITHDRAW);
		//释放设备和任务单的指针
		mp_passageway_task.reset();
		mp_passageway.reset();
	}

	return Error_code::SUCCESS;
}

//检查流程是否空闲待机
Error_manager Dispatch_process::check_process_ready()
{
	return Error_code::SUCCESS;

//	if ( m_dispatch_process_status == DISPATCH_PROCESS_READY )
//	{
//	    return Error_code::SUCCESS;
//	}
//	else
//	{
//	    return Error_manager(Error_code::DISPATCH_PROCESS_IS_NOT_READY, Error_level::MINOR_ERROR,
//	    					" Dispatch_process::check_process_ready() fun error ");
//	}
}

void Dispatch_process::Main()
{
	Error_manager t_error;

	//主流程, 循环执行
	while ( std::chrono::system_clock::now() - m_start_time < std::chrono::milliseconds(m_timeout_ms) )
	{
		std::this_thread::sleep_for(std::chrono::microseconds(1));
		std::this_thread::sleep_for(std::chrono::milliseconds(1));
//		std::this_thread::sleep_for(std::chrono::seconds(1));
		std::cout << " huli test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: " << " m_dispatch_process_status = " << m_dispatch_process_status << std::endl;

		switch ( m_dispatch_process_status )
		{
			case DISPATCH_PROCESS_CREATED://流程创建,
			{
				//检查调度请求
				m_result = check_dispatch_request_msg();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//发送调度总计划
				m_result = send_dispatch_plan_request_msg();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//流程正常, 就进入等待状态, 等待调度控制发送动作指令
				m_dispatch_process_status = DISPATCH_PROCESS_READY;
				break;
			}
			case DISPATCH_PROCESS_READY://流程准备，待机
			{
				//等待控制指令
				m_result = wait_dispatch_control_request_msg();
				if ( m_result ==Error_code::SUCCESS)
				{
					//流程正常, 就去连接设备
					m_dispatch_process_status = DISPATCH_PROCESS_CONNECT_DEVICE;
					break;

				}
				else if ( m_result !=Error_code::NODATA )
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//else nodata, 就表示没有新的指令, 那么什么都不做, 原地待命

				//等待调度总计划答复
				m_result = wait_dispatch_plan_response_msg();
				if ( m_result ==Error_code::SUCCESS)
				{
					//流程正常, 就进入完成状态,
					m_dispatch_process_status = DISPATCH_PROCESS_OVER;
					break;
				}
				else if ( m_result !=Error_code::NODATA )
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//else nodata, 就表示没有新的指令, 那么什么都不做, 原地待命

				break;
			}
			case DISPATCH_PROCESS_CONNECT_DEVICE://流程 连接设备
			{
				std::this_thread::sleep_for(std::chrono::seconds(1));
				//连接调度设备
				m_result = connect_dispatch_device();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//流程正常, 就进入工作状态,
				m_dispatch_process_status = DISPATCH_PROCESS_WORKING;
				m_time_to_send_control_response = std::chrono::system_clock::now();
				break;
			}
			case DISPATCH_PROCESS_WORKING://流程工作正忙, 进行长流程
			{
				//执行调度控制指令, 并根据完成情况给答复
				m_result = excute_dispatch_control();
				if ( m_result == Error_code::NODATA )
				{
					//继续 长流程, 什么也不做

					if ( std::chrono::system_clock::now() - m_time_to_send_control_response >= std::chrono::seconds(1) )
					{
						//发送调度控制答复, 发给调度控制的
						t_error = send_dispatch_control_response_msg(message::E_TASK_WORKING);
						m_time_to_send_control_response = std::chrono::system_clock::now();
						m_result = t_error;
						if ( m_result !=Error_code::SUCCESS)
						{
							m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
							break;
						}
					}
				}
				else
				{
					//长流程结束, 就答复 control_response_msg
					// 注:这里执行调度控制, 即使报错了 也要答复给调度控制, 交给调度控制来进行决策.
					m_dispatch_process_status = DISPATCH_PROCESS_RESPONSE;
				}
				break;
			}
			case DISPATCH_PROCESS_RESPONSE://流程 给调度控制答复
			{
				//发送调度控制答复, 发给调度控制的
				t_error = send_dispatch_control_response_msg(message::E_TASK_OVER);
				m_result = t_error;
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//流程正常, 就进入等待状态, 等待调度控制发送动作指令
				m_dispatch_process_status = DISPATCH_PROCESS_DISCONNECT_DEVICE;
				break;
			}
			case DISPATCH_PROCESS_DISCONNECT_DEVICE://流程 解除设备
			{
				//断开调度设备, 释放任务单 与设备解除连接
				m_result = disconnect_dispatch_device();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//流程正常, 就回到 等待状态, 等待调度控制发送动作指令
				m_dispatch_process_status = DISPATCH_PROCESS_READY;
				break;
			}
			case DISPATCH_PROCESS_OVER://流程完成
			{
				//发送调度答复, 发给主控的
				m_result = send_dispatch_response_msg();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}
				//流程正常, 就进入等待状态, 等待调度控制发送动作指令
				m_dispatch_process_status = DISPATCH_PROCESS_RELEASE;
				break;
			}
			case DISPATCH_PROCESS_RELEASE://流程释放
			{
				//通知调度管理, 释放资源,
				m_result = release_resource();
				if ( m_result !=Error_code::SUCCESS)
				{
					m_dispatch_process_status = DISPATCH_PROCESS_FAULT;
					break;
				}

				//在这里, 整个流程彻底结束, 之后线程池会自动回收 这个流程对象的资源
				return;
				break;
			}
			case DISPATCH_PROCESS_FAULT://故障
			{
				release_resource();
				Exception_handling();
				//在这里, 整个流程彻底结束, 之后线程池会自动回收 这个流程对象的资源
				return;
				break;
			}
			default:
			{

				break;
			}
		}
	}

	//任务超时
	LOG(INFO) << " Dispatch_process::Main() time out  "<< this;
	return;
}


//检查调度请求
Error_manager Dispatch_process::check_dispatch_request_msg()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	return Error_code::SUCCESS;
}

//发送调度总计划
Error_manager Dispatch_process::send_dispatch_plan_request_msg()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	m_dispatch_plan_request_msg.mutable_base_info()->set_msg_type(message::Message_type::eDispatch_plan_request_msg);
	m_dispatch_plan_request_msg.mutable_base_info()->set_timeout_ms(m_timeout_ms);
	m_dispatch_plan_request_msg.mutable_base_info()->set_sender(message::Communicator::eDispatch_manager);
	m_dispatch_plan_request_msg.mutable_base_info()->set_receiver(message::Communicator::eDispatch_control);
	m_dispatch_plan_request_msg.set_command_key(m_dispatch_request_msg.command_key());

	m_dispatch_plan_request_msg.set_dispatch_task_type((message::Dispatch_task_type)m_dispatch_process_type);
	m_dispatch_plan_request_msg.set_dispatch_source(m_dispatch_source);
	m_dispatch_plan_request_msg.set_dispatch_destination(m_dispatch_destination);
	//这里不写错误码

	std::string t_msg = m_dispatch_plan_request_msg.SerializeAsString();
	System_communication::get_instance_references().encapsulate_msg(t_msg);
	return Error_code::SUCCESS;
}


//等待控制指令
Error_manager Dispatch_process::wait_dispatch_control_request_msg()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	//key不相等 就表示 收到了新的控制指令
	if ( m_dispatch_control_request_msg_catcher.command_key() == m_dispatch_control_response_msg_catcher.command_key() &&
		m_dispatch_control_request_msg_carrier.command_key() == m_dispatch_control_response_msg_carrier.command_key())
	{
		return Error_code::NODATA;
	}
	else
	{
		return Error_code::SUCCESS;
	}
}


//连接调度设备, 创建新的任务单 与设备建立连接
Error_manager Dispatch_process::connect_dispatch_device()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	Error_manager t_error;

	std::cout << " huli test :::: " << " m_dispatch_control_request_msg_catcher = " << m_dispatch_control_request_msg_catcher.DebugString() << std::endl;
	std::cout << " huli test :::: " << " m_dispatch_control_request_msg_carrier = " << m_dispatch_control_request_msg_carrier.DebugString() << std::endl;

	if ( m_dispatch_control_request_msg_catcher.command_key() != m_dispatch_control_response_msg_catcher.command_key())
	{
		//机器手的配置 准备工作
		if ( m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_1 ||
			 m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_2 )
		{
			//找到对应的设备
			if ( m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_1 )
			{
				mp_catcher = Dispatch_manager::get_instance_references().m_catcher_map[0];
			}
			if ( m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_2 )
			{
				mp_catcher = Dispatch_manager::get_instance_references().m_catcher_map[1];
			}

			Catcher* tp_catcher = (Catcher*)mp_catcher.get();
			//检查设备状态
			if ( tp_catcher->check_status() == Error_code::SUCCESS &&
				 tp_catcher->m_actual_device_status == Dispatch_device_base::DEVICE_READY )
			{
				//创建任务单
				mp_catcher_task = std::shared_ptr<Task_Base>(new Catcher_task);
				mp_catcher_task->task_init(NULL,std::chrono::milliseconds(15000));
				Catcher_task * tp_catcher_task = (Catcher_task *)mp_catcher_task.get();

				//第一次发送 空的唯一码, 可以和设备建立联系
				tp_catcher_task->m_request_key = "";
				tp_catcher_task->m_request_x = tp_catcher->m_actual_x;
				tp_catcher_task->m_request_y = tp_catcher->m_actual_y;
				tp_catcher_task->m_request_b = tp_catcher->m_actual_b;
				tp_catcher_task->m_request_z = tp_catcher->m_actual_z;
				tp_catcher_task->m_request_d1 = tp_catcher->m_actual_d1;
				tp_catcher_task->m_request_d2 = tp_catcher->m_actual_d2;
				tp_catcher_task->m_request_wheelbase = Dispatch_coordinates::get_instance_references().m_default_wheelbase;
				tp_catcher_task->m_request_clamp_motion = (Catcher_task::Clamp_motion)tp_catcher->m_actual_clamp_motion1;

				t_error = tp_catcher->execute_task(mp_catcher_task, Dispatch_device_base::E_ONE_LEVEL);
				if ( t_error != Error_code::SUCCESS )
				{
					return t_error;
				}
			}
			else
			{
				return Error_manager(Error_code::DISPATCH_PROCESS_DEVICE_STATUS_ERROR, Error_level::MINOR_ERROR,
									 " tp_catcher->m_actual_device_status device_status error ");
			}

			//设置起点
			m_source_coordinates_catcher = Dispatch_coordinates::get_instance_references().m_catcher_coordinates[m_dispatch_control_request_msg_catcher.dispatch_source()];
			//设置终点
			m_destination_coordinates_catcher = Dispatch_coordinates::get_instance_references().m_catcher_coordinates[m_dispatch_control_request_msg_catcher.dispatch_destination()];

			std::cout << " huli test :::: " << " ---------------------------------------- = " << 123 << std::endl;
			std::cout << " huli test :::: " << " m_dispatch_control_request_msg_catcher.dispatch_destination() = " << m_dispatch_control_request_msg_catcher.dispatch_destination() << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_catcher.x = " << m_destination_coordinates_catcher.x << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_catcher.y = " << m_destination_coordinates_catcher.y << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_catcher.z = " << m_destination_coordinates_catcher.z << std::endl;
			std::cout << " huli test :::: " << "*******************************************" << 123 << std::endl;
		}
	}

	if ( m_dispatch_control_request_msg_carrier.command_key() != m_dispatch_control_response_msg_carrier.command_key())
	{
		//搬运器的配置 准备工作
		if ( m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_1 ||
			 m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_2 ||
			 m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_3 )
		{
			//找到对应的设备
			if ( m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_1 )
			{
				mp_carrier = Dispatch_manager::get_instance_references().m_carrier_map[0];
			}
			if ( m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_2 )
			{
				mp_carrier = Dispatch_manager::get_instance_references().m_carrier_map[1];
			}
			if ( m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_3 )
			{
				mp_carrier = Dispatch_manager::get_instance_references().m_carrier_map[2];
			}

			Carrier* tp_carrier = (Carrier*)mp_carrier.get();
			//检查设备状态
			if ( tp_carrier->check_status() == Error_code::SUCCESS &&
				 tp_carrier->m_actual_device_status == Dispatch_device_base::DEVICE_READY )
			{
				//创建任务单
				mp_carrier_task = std::shared_ptr<Task_Base>(new Carrier_task);

				mp_carrier_task->task_init(NULL,std::chrono::milliseconds(15000));
				Carrier_task * tp_carrier_task = (Carrier_task *)mp_carrier_task.get();

				//第一次发送 空的唯一码, 可以和设备建立联系
				tp_carrier_task->m_request_key = "";
				tp_carrier_task->m_request_x = tp_carrier->m_actual_x;
				tp_carrier_task->m_request_y = tp_carrier->m_actual_y;
				tp_carrier_task->m_request_z = tp_carrier->m_actual_z;
				tp_carrier_task->m_request_y1 = tp_carrier->m_actual_y1;
				tp_carrier_task->m_request_y2 = tp_carrier->m_actual_y2;
				tp_carrier_task->m_request_clamp_motion = (Carrier_task::Clamp_motion)tp_carrier->m_actual_clamp_motion1;
				tp_carrier_task->m_request_joint_motion_x = (Carrier_task::Joint_motion)tp_carrier->m_actual_joint_motion_x1;
				tp_carrier_task->m_request_joint_motion_y = Carrier_task::Joint_motion::E_JOINT_NO_ACTION;
				tp_carrier_task->m_request_space_id = 0;
				tp_carrier_task->m_request_floor_id = 0;
				tp_carrier_task->m_request_wheelbase = Dispatch_coordinates::get_instance_references().m_default_wheelbase;

				t_error = tp_carrier->execute_task(mp_carrier_task, Dispatch_device_base::E_ONE_LEVEL);
				if ( t_error != Error_code::SUCCESS )
				{
					return t_error;
				}
			}
			else
			{
				return Error_manager(Error_code::DISPATCH_PROCESS_DEVICE_STATUS_ERROR, Error_level::MINOR_ERROR,
									 " tp_carrier->m_actual_device_status device_status error ");
			}

			//设置起点
			m_source_coordinates_carrier = Dispatch_coordinates::get_instance_references().m_carrier_coordinates[m_dispatch_control_request_msg_carrier.dispatch_source()];
			//设置终点
			m_destination_coordinates_carrier = Dispatch_coordinates::get_instance_references().m_carrier_coordinates[m_dispatch_control_request_msg_carrier.dispatch_destination()];

			std::cout << " huli test :::: " << " ---------------------------------------- = " << 123 << std::endl;
			std::cout << " huli test :::: " << " m_dispatch_control_request_msg_carrier.dispatch_destination() = " << m_dispatch_control_request_msg_carrier.dispatch_destination() << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_carrier.x = " << m_destination_coordinates_carrier.x << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_carrier.y = " << m_destination_coordinates_carrier.y << std::endl;
			std::cout << " huli test :::: " << " m_destination_coordinates_carrier.z = " << m_destination_coordinates_carrier.z << std::endl;
			std::cout << " huli test :::: " << "*******************************************" << 123 << std::endl;
		}
		else
		{
			return Error_manager(Error_code::DISPATCH_PROCESS_DEVICE_TYPE_ERROR, Error_level::MINOR_ERROR,
								 " DISPATCH_PROCESS_DEVICE_TYPE_ERROR fun error ");
		}
	}

	return Error_code::SUCCESS;
}


//执行调度控制指令, 并根据完成情况给答复
Error_manager Dispatch_process::excute_dispatch_control()
{
	Error_manager t_error_catcher;
	Error_manager t_error_carrier;

	if ( mp_catcher.get() != NULL && mp_catcher_task != NULL )
	{
		Catcher_task * tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
//		while (1)
//		{
//			char in;
//			std::cin >> in ;
//			if ( in == 'p' )
//			{
//				break;
//			}
//		}
		std::cout << " huli test :::: " << "ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp  = " << tp_catcher_task->m_step << std::endl;
		std::cout << " huli test :::: " << "1111111 tp_catcher_task->m_step   = " << tp_catcher_task->m_step << std::endl;

		//设备的动作也使用外部的Main()的线程来循环
		switch ( m_dispatch_control_request_msg_catcher.dispatch_task_type() )
		{
			case message::Dispatch_task_type::ROBOT_CATCH_CAR_FROM_INLET:
			{
				t_error_catcher = excute_robot_catch_car_from_inlet();
				break;
			}
			case message::Dispatch_task_type::ROBOT_PUT_CAR_TO_CARRIER:
			{
				t_error_catcher = excute_robot_put_car_to_carrier();
				break;
			}
			case message::Dispatch_task_type::ROBOT_CATCH_CAR_FROM_CARRIER:
			{
				t_error_catcher = excute_robot_catch_car_from_carrier();
				break;
			}
			case message::Dispatch_task_type::ROBOT_PUT_CAR_TO_OUTLET:
			{
				t_error_catcher = excute_robot_put_car_to_outlet();
				break;
			}
			case message::Dispatch_task_type::ROBOT_MOVE:
			{
				t_error_catcher = excute_robot_move();
				break;
			}

			default:
			{
//			return Error_manager(Error_code::DISPATCH_PROCESS_TASK_STATUS_ERROR, Error_level::MINOR_ERROR,
//								 "Dispatch_process::excute_dispatch_control() fun error ");
				break;
			}
		}
		std::cout << " huli test :::: " << "222222 tp_catcher_task->m_step   = " << tp_catcher_task->m_step << std::endl;
		std::cout << " huli test :::: " << " t_error_catcher = " << t_error_catcher.to_string() << std::endl;
	}

	if ( mp_carrier.get() != NULL && mp_carrier_task != NULL )
	{
		Catcher_task *tp_carrier_task = (Catcher_task *) mp_carrier_task.get();
//		while (1)
//		{
//			char in;
//			std::cin >> in;
//			if (in == 'l')
//			{
//				break;
//			}
//		}
		std::cout << " huli test :::: " << "lllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll   = " << tp_carrier_task->m_step << std::endl;
		std::cout << " huli test :::: " << "3333333 tp_carrier_task->m_step   = " << tp_carrier_task->m_step << std::endl;

		//设备的动作也使用外部的Main()的线程来循环
		switch (m_dispatch_control_request_msg_carrier.dispatch_task_type())
		{

			case message::Dispatch_task_type::CARRIER_RECEIVE_CAR_FROM_ROBOT:
			{
				t_error_carrier = excute_carrier_receive_car_from_robot();
				break;
			}
			case message::Dispatch_task_type::CARRIER_STORE_CAR_TO_PARKINGSPACE:
			{
				t_error_carrier = excute_carrier_store_car_to_parkingspace();
				break;
			}
			case message::Dispatch_task_type::CARRIER_STORE_CAR_TO_PARKINGSPACE_EX:
			{
				t_error_carrier = excute_carrier_store_car_to_parkingspace_ex();
				break;
			}
			case message::Dispatch_task_type::CARRIER_PICKUP_CAR_FROM_PARKINGSPACE:
			{
				t_error_carrier = excute_carrier_pickup_car_from_parkingspace();
				break;
			}
			case message::Dispatch_task_type::CARRIER_PICKUP_CAR_FROM_PARKINGSPACE_EX:
			{
				t_error_carrier = excute_carrier_pickup_car_from_parkingspace_ex();
				break;
			}
			case message::Dispatch_task_type::CARRIER_DELIVER_CAR_TO_ROBOT:
			{
				t_error_carrier = excute_carrier_deliver_car_to_robot();
				break;
			}
			case message::Dispatch_task_type::CARRIER_MOVE:
			{
				t_error_carrier = excute_carrier_move();
				break;
			}
			default:
			{
//			return Error_manager(Error_code::DISPATCH_PROCESS_TASK_STATUS_ERROR, Error_level::MINOR_ERROR,
//								 "Dispatch_process::excute_dispatch_control() fun error ");
				break;
			}
		}
		std::cout << " huli test :::: " << "44444444 tp_carrier_task->m_step   = " << tp_carrier_task->m_step << std::endl;
		std::cout << " huli test :::: " << " t_error_carrier = " << t_error_carrier.to_string() << std::endl;
	}


	if ( t_error_catcher == Error_code::NODATA || t_error_carrier == Error_code::NODATA )
	{
		return Error_code::NODATA;
	}
	else
	{
		LOG(INFO) << " Dispatch_process::excute_dispatch_control() is error "<< "   " << this;
		LOG(INFO) << " Dispatch_process::excute_dispatch_control() t_error_catcher =  "<<t_error_catcher.to_string()<< "   " << this;
		LOG(INFO) << " Dispatch_process::excute_dispatch_control() t_error_carrier =  "<<t_error_carrier.to_string()<< "   " << this;

		t_error_catcher.compare_and_cover_error(t_error_carrier);
		return t_error_catcher;
	}

	return Error_code::SUCCESS;
}
//发送调度控制答复, 发给调度控制的
Error_manager Dispatch_process::send_dispatch_control_response_msg(message::Dispatch_device_task_status dispatch_device_task_status)
{
	if ( mp_catcher.get() != NULL )
	{
		std::unique_lock<std::mutex> t_lock(m_lock);
		m_dispatch_control_response_msg_catcher.mutable_base_info()->set_msg_type(message::Message_type::eDispatch_control_response_msg);
		m_dispatch_control_response_msg_catcher.mutable_base_info()->set_timeout_ms(m_timeout_ms);
		m_dispatch_control_response_msg_catcher.mutable_base_info()->set_sender(message::Communicator::eDispatch_manager);
		m_dispatch_control_response_msg_catcher.mutable_base_info()->set_receiver(message::Communicator::eDispatch_control);
		m_dispatch_control_response_msg_catcher.set_command_key(m_dispatch_control_request_msg_catcher.command_key());

		m_dispatch_control_response_msg_catcher.set_dispatch_task_type(m_dispatch_control_request_msg_catcher.dispatch_task_type());
		m_dispatch_control_response_msg_catcher.set_dispatch_device_type(m_dispatch_control_request_msg_catcher.dispatch_device_type());
		m_dispatch_control_response_msg_catcher.set_dispatch_source(m_dispatch_control_request_msg_catcher.dispatch_source());
		m_dispatch_control_response_msg_catcher.set_dispatch_destination(m_dispatch_control_request_msg_catcher.dispatch_destination());

		m_dispatch_control_response_msg_catcher.mutable_error_manager()->set_error_code(m_result.get_error_code());
		m_dispatch_control_response_msg_catcher.mutable_error_manager()->set_error_level((message::Error_level)m_result.get_error_level());
		m_dispatch_control_response_msg_catcher.mutable_error_manager()->set_error_description(m_result.get_error_description(), m_result.get_description_length());

		m_dispatch_control_response_msg_catcher.set_dispatch_device_target_status(m_dispatch_control_request_msg_catcher.dispatch_device_target_status());
		m_dispatch_control_response_msg_catcher.set_dispatch_device_task_status(dispatch_device_task_status);

		std::string t_msg = m_dispatch_control_response_msg_catcher.SerializeAsString();
		System_communication::get_instance_references().encapsulate_msg(t_msg);
	}
	if ( mp_carrier.get() != NULL )
	{
		std::unique_lock<std::mutex> t_lock(m_lock);
		m_dispatch_control_response_msg_carrier.mutable_base_info()->set_msg_type(message::Message_type::eDispatch_control_response_msg);
		m_dispatch_control_response_msg_carrier.mutable_base_info()->set_timeout_ms(m_timeout_ms);
		m_dispatch_control_response_msg_carrier.mutable_base_info()->set_sender(message::Communicator::eDispatch_manager);
		m_dispatch_control_response_msg_carrier.mutable_base_info()->set_receiver(message::Communicator::eDispatch_control);
		m_dispatch_control_response_msg_carrier.set_command_key(m_dispatch_control_request_msg_carrier.command_key());

		m_dispatch_control_response_msg_carrier.set_dispatch_task_type(m_dispatch_control_request_msg_carrier.dispatch_task_type());
		m_dispatch_control_response_msg_carrier.set_dispatch_device_type(m_dispatch_control_request_msg_carrier.dispatch_device_type());
		m_dispatch_control_response_msg_carrier.set_dispatch_source(m_dispatch_control_request_msg_carrier.dispatch_source());
		m_dispatch_control_response_msg_carrier.set_dispatch_destination(m_dispatch_control_request_msg_carrier.dispatch_destination());

		m_dispatch_control_response_msg_carrier.mutable_error_manager()->set_error_code(m_result.get_error_code());
		m_dispatch_control_response_msg_carrier.mutable_error_manager()->set_error_level((message::Error_level)m_result.get_error_level());
		m_dispatch_control_response_msg_carrier.mutable_error_manager()->set_error_description(m_result.get_error_description(), m_result.get_description_length());

		m_dispatch_control_response_msg_carrier.set_dispatch_device_target_status(m_dispatch_control_request_msg_carrier.dispatch_device_target_status());
		m_dispatch_control_response_msg_carrier.set_dispatch_device_task_status(dispatch_device_task_status);

		std::string t_msg = m_dispatch_control_response_msg_carrier.SerializeAsString();
		System_communication::get_instance_references().encapsulate_msg(t_msg);
	}

	return Error_code::SUCCESS;
}
//断开调度设备, 释放任务单 与设备解除连接
Error_manager Dispatch_process::disconnect_dispatch_device()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	Error_manager t_error;

	//机器手
	if ( m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_1 ||
	m_dispatch_control_request_msg_catcher.dispatch_device_type() == message::Dispatch_device_type::ROBOT_2 )
	{
		if ( mp_catcher.get() != NULL && mp_catcher_task.get() != NULL )
		{
			//收回任务
			mp_catcher_task->set_task_statu(Task_Base::Task_statu::TASK_WITHDRAW);
			//释放设备和任务单的指针
			mp_catcher_task.reset();
			mp_catcher.reset();
		}
	}
		//搬运器
	if ( m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_1 ||
			  m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_2 ||
			  m_dispatch_control_request_msg_carrier.dispatch_device_type() == message::Dispatch_device_type::CARRIER_3 )
	{
		if ( mp_carrier.get() != NULL && mp_carrier_task.get() != NULL )
		{
			//收回任务
			mp_carrier_task->set_task_statu(Task_Base::Task_statu::TASK_WITHDRAW);
			//释放设备和任务单的指针
			mp_carrier_task.reset();
			mp_carrier.reset();


		}
	}

	return Error_code::SUCCESS;}

//等待调度总计划答复
Error_manager Dispatch_process::wait_dispatch_plan_response_msg()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	//key 相等 就表示 收到了总计划答复
	if ( m_dispatch_plan_request_msg.command_key() == m_dispatch_plan_response_msg.command_key() )
	{
		return Error_code::SUCCESS;
	}
	else
	{
		return Error_code::NODATA;
	}
}

//发送调度答复, 发给主控的
Error_manager Dispatch_process::send_dispatch_response_msg()
{
	std::unique_lock<std::mutex> t_lock(m_lock);
	m_dispatch_response_msg.mutable_base_info()->set_msg_type(message::Message_type::eDispatch_response_msg);
	m_dispatch_response_msg.mutable_base_info()->set_timeout_ms(m_timeout_ms);
	m_dispatch_response_msg.mutable_base_info()->set_sender(message::Communicator::eDispatch_manager);
	m_dispatch_response_msg.mutable_base_info()->set_receiver(message::Communicator::eMain);
	m_dispatch_response_msg.set_command_key(m_dispatch_request_msg.command_key());

	m_dispatch_response_msg.mutable_error_manager()->CopyFrom(m_dispatch_plan_response_msg.error_manager());

	std::string t_msg = m_dispatch_response_msg.SerializeAsString();
	System_communication::get_instance_references().encapsulate_msg(t_msg);
	return Error_code::SUCCESS;
}

//通知调度管理, 释放资源,
Error_manager Dispatch_process::release_resource()
{
	return Dispatch_manager::get_instance_references().release_dispatch_process(m_command_key);
}

//异常处理
Error_manager Dispatch_process::Exception_handling()
{
	LOG(INFO) << " -------------Dispatch_process::Exception_handling------------------- "<< this;
	LOG(INFO) << " m_result =  "<< m_result.to_string() << "   " << this;
	return Error_code::SUCCESS;
}





//机器手去入口抓车(例如:机器手移动到2号入口上方,然后下降到一楼抓车,最后上升到最上方)
Error_manager Dispatch_process::excute_robot_catch_car_from_inlet()
{
	Error_manager t_error;
	Catcher * tp_catcher = NULL;
	Catcher_task * tp_catcher_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_catcher.get() == NULL || mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_catcher = (Catcher *)mp_catcher.get();
		tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_catcher_task->m_step << std::endl;
//	getchar();
	if ( tp_catcher_task->m_step == 0 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 1 )//检查姿态
	{
		if ( tp_catcher->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR )
		{
			if ( tp_catcher->m_actual_clamp_motion1 != Dispatch_device_base::Clamp_motion::E_CLAMP_LOOSE ||
				 tp_catcher->m_actual_d1 + tp_catcher->m_actual_d2 + tp_dispatch_coordinates->m_catcher_d1_d2_distance >
				 tp_dispatch_coordinates->m_catcher_wheel_base_limit ||
				 tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_UNKNOW	)
			{
				catcher_adjust_to_ready(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
				tp_catcher_task->m_step++;
			}
			else
			{
				tp_catcher_task->m_step +=2;
			}
		}
		else
		{
			return Error_manager(Error_code::CATCHER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_robot_catch_car_from_inlet() fun error ");
		}
	}
	if ( tp_catcher_task->m_step == 2 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 3 )//机器手z轴移到最高点.
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 4 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 5 )//机器手 调整x y b d1 d2, 根据感测模块的定位信息, 调整机器手的姿态, 准备抓车.
	{
		catcher_adjust_from_ground(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 6 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 7 )//机器手z轴移到最低点.
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_1th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 8 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 9 )//修正轴距, 如果轴距大于3000mm, 那么就要修正轴距.
	{
		float temp_wheel_base = tp_catcher->m_actual_d1 + tp_catcher->m_actual_d2 + tp_dispatch_coordinates->m_catcher_d1_d2_distance;
		//修正轴距, 如果轴距大于3000mm, 那么就要修正轴距.
		if ( Common_data::approximate_difference(m_wheel_base, temp_wheel_base, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_adjust_wheel_base(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 10 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 11 )//机器手 夹车
	{
		catcher_move_c(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, Catcher_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 12 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 13 )//机器手 z轴上升到最高处
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 14 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 15 )//机器手调整到 准备把车放到搬运器的姿态
	{
		//这里机器手要反向,
		catcher_adjust_to_carrier(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, true);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 16 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 17 )
	{
		return Error_code::SUCCESS;
	}
}
//机器手把车放到中跑车上面(例如:机器手下降到中跑车上放车,最后上升到最上方)(通过目标点 指定放到哪一个中跑车上)
Error_manager Dispatch_process::excute_robot_put_car_to_carrier()
{
	Error_manager t_error;
	Catcher * tp_catcher = NULL;
	Catcher_task * tp_catcher_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_catcher.get() == NULL || mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_catcher = (Catcher *)mp_catcher.get();
		tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_catcher_task->m_step << std::endl;
//	getchar();
	if ( tp_catcher_task->m_step == 0 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 1 )//检查姿态
	{
		if ( tp_catcher->m_actual_load_status == Dispatch_device_base::Load_status::HAVE_CAR &&
			 tp_catcher->m_actual_clamp_motion1 == Dispatch_device_base::Clamp_motion::E_CLAMP_TIGHT &&
			 (Common_data::approximate_difference(tp_catcher->m_actual_b, 90, DISPATCH_DEFAULT_DIFFERENCE) || Common_data::approximate_difference(tp_catcher->m_actual_b, 270, DISPATCH_DEFAULT_DIFFERENCE) ) )
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			return Error_manager(Error_code::CATCHER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_robot_put_car_to_carrier() fun error ");
		}
	}
	if ( tp_catcher_task->m_step == 2 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 3 )//机器手 调整z轴
	{
		if ( tp_catcher->m_actual_z*1.02 >= m_destination_coordinates_catcher.z )
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 4 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 5 )//机器手调整到 准备把车放到搬运器的姿态
	{
		float temp_y = tp_dispatch_coordinates->m_carrier_default_y1_back - (m_wheel_base /2);
		if ( Common_data::approximate_difference(tp_catcher->m_actual_x, m_destination_coordinates_catcher.x, DISPATCH_DEFAULT_DIFFERENCE) &&
			 Common_data::approximate_difference(tp_catcher->m_actual_y, temp_y, DISPATCH_DEFAULT_DIFFERENCE))
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_adjust_to_carrier(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, false);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 6 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 7 )//机器手 z轴下降
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, m_destination_coordinates_catcher.z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 8 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 9 )//机器手 松开夹杆
	{
		catcher_move_c(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, Catcher_task::Clamp_motion::E_CLAMP_LOOSE);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 10 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 11 )//机器手 z轴上升
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 12 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 13 )
	{
		return Error_code::SUCCESS;
	}
}
//机器手去中跑车上抓车(例如:机器手移动到1号中跑车上方,然后下降到中跑车抓车,最后上升到最上方)
Error_manager Dispatch_process::excute_robot_catch_car_from_carrier()
{
	Error_manager t_error;
	Catcher * tp_catcher = NULL;
	Catcher_task * tp_catcher_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_catcher.get() == NULL || mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_catcher = (Catcher *)mp_catcher.get();
		tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_catcher_task->m_step << std::endl;
//	getchar();
	if ( tp_catcher_task->m_step == 0 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 1 )
	{
		if ( tp_catcher->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR )
		{
			if ( tp_catcher->m_actual_clamp_motion1 != Dispatch_device_base::Clamp_motion::E_CLAMP_LOOSE ||
				 tp_catcher->m_actual_d1 + tp_catcher->m_actual_d2 + tp_dispatch_coordinates->m_catcher_d1_d2_distance >
				 tp_dispatch_coordinates->m_catcher_wheel_base_limit ||
				 tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_UNKNOW	)
			{
				catcher_adjust_to_ready(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
				tp_catcher_task->m_step++;
			}
			else
			{
				tp_catcher_task->m_step +=2;
			}
		}
		else
		{
			return Error_manager(Error_code::CATCHER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_robot_catch_car_from_carrier() fun error ");
		}
	}
	if ( tp_catcher_task->m_step == 2 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 3 )//机器手 调整z轴
	{
		if ( tp_catcher->m_actual_z*1.02 >= m_destination_coordinates_catcher.z )
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 4 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 5 )//机器手调整到 准备把车放到搬运器的姿态
	{
		float temp_y = tp_dispatch_coordinates->m_carrier_default_y1_back - (m_wheel_base /2);
		if ( Common_data::approximate_difference(tp_catcher->m_actual_x, m_destination_coordinates_catcher.x, DISPATCH_DEFAULT_DIFFERENCE) &&
			 Common_data::approximate_difference(tp_catcher->m_actual_y, temp_y, DISPATCH_DEFAULT_DIFFERENCE))
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_adjust_from_carrier(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 6 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 7 )//机器手 z轴下降
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, m_destination_coordinates_catcher.z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 8 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 9 )//修正轴距, 如果轴距大于3000mm, 那么就要修正轴距.
	{
		float temp_wheel_base = tp_catcher->m_actual_d1 + tp_catcher->m_actual_d2 + tp_dispatch_coordinates->m_catcher_d1_d2_distance;
		//修正轴距, 如果轴距大于3000mm, 那么就要修正轴距.
		if ( Common_data::approximate_difference(m_wheel_base, temp_wheel_base, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_adjust_wheel_base(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 10 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 11 )//机器手 夹车
	{
		catcher_move_c(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, Catcher_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 12 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 13 )//机器手 z轴上升
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 14 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 15 )
	{
		return Error_code::SUCCESS;
	}
}
//机器手去出口放车(例如:机器手移动到3号出口上方,然后下降到一楼放车,最后上升到最上方)
Error_manager Dispatch_process::excute_robot_put_car_to_outlet()
{
	Error_manager t_error;
	Catcher * tp_catcher = NULL;
	Catcher_task * tp_catcher_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_catcher.get() == NULL || mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_catcher = (Catcher *)mp_catcher.get();
		tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_catcher_task->m_step << std::endl;
//	getchar();
	if ( tp_catcher_task->m_step == 0 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 1 )//检查姿态
	{
		if ( tp_catcher->m_actual_load_status == Dispatch_device_base::Load_status::HAVE_CAR &&
			 tp_catcher->m_actual_clamp_motion1 == Dispatch_device_base::Clamp_motion::E_CLAMP_TIGHT &&
			 (Common_data::approximate_difference(tp_catcher->m_actual_b, 90, DISPATCH_DEFAULT_DIFFERENCE) || Common_data::approximate_difference(tp_catcher->m_actual_b, 270, DISPATCH_DEFAULT_DIFFERENCE) ) )
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			return Error_manager(Error_code::CATCHER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_robot_put_car_to_carrier() fun error ");
		}
	}
	if ( tp_catcher_task->m_step == 2 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 3 )//机器手 调整z轴
	{
		if ( tp_catcher->m_actual_z*1.02 >= m_destination_coordinates_catcher.z )
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 4 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 5 )//机器手调整到 准备把车放到搬运器的姿态
	{
		float temp_y = tp_dispatch_coordinates->m_carrier_default_y1_back - (m_wheel_base /2);
		if ( Common_data::approximate_difference(tp_catcher->m_actual_x, m_destination_coordinates_catcher.x, DISPATCH_DEFAULT_DIFFERENCE) &&
			 Common_data::approximate_difference(tp_catcher->m_actual_y, temp_y, DISPATCH_DEFAULT_DIFFERENCE))
		{
			//检测正常, 直接跳过即可
			tp_catcher_task->m_step +=2;
		}
		else
		{
			catcher_adjust_to_ground(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
			tp_catcher_task->m_step++;
		}
	}
	if ( tp_catcher_task->m_step == 6 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 7 )//机器手 z轴下降
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, m_destination_coordinates_catcher.z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 8 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 9 )//机器手 松开夹杆
	{
		catcher_move_c(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, Catcher_task::Clamp_motion::E_CLAMP_LOOSE);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 10 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 11 )//机器手 z轴上升
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_catcher_4th_floor_z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 12 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 13 )
	{
		return Error_code::SUCCESS;
	}
}
//机器手的自由移动(例如:机器手移动到6号出入口的上方4楼处,给其他设备避让)(不进行抓车和放车的操作)
Error_manager Dispatch_process::excute_robot_move()
{

	Error_manager t_error;
	Catcher * tp_catcher = NULL;
	Catcher_task * tp_catcher_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_catcher.get() == NULL || mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_catcher = (Catcher *)mp_catcher.get();
		tp_catcher_task = (Catcher_task *)mp_catcher_task.get();
	}
	if ( tp_catcher_task->m_step == 0 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 1 )//检查姿态
	{
		if (  tp_catcher->m_actual_d1 + tp_catcher->m_actual_d2 + tp_dispatch_coordinates->m_catcher_d1_d2_distance >
			  tp_dispatch_coordinates->m_catcher_wheel_base_limit ||
			  tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_UNKNOW	)
		{
			catcher_adjust_to_ready(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
			tp_catcher_task->m_step++;
		}
		else
		{
			tp_catcher_task->m_step +=2;
		}
	}
	if ( tp_catcher_task->m_step == 2 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 3 )//机器手 调整z轴
	{
		catcher_move_z(tp_catcher, tp_catcher_task, tp_dispatch_coordinates, m_destination_coordinates_catcher.z);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 4 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 5 )//机器手调整到 准备把车放到搬运器的姿态
	{
		catcher_adjust_to_ground(tp_catcher, tp_catcher_task, tp_dispatch_coordinates);
		tp_catcher_task->m_step++;
	}
	if ( tp_catcher_task->m_step == 6 )
	{
		return check_task_ex(mp_catcher_task, tp_catcher_task->m_step);
	}
	if ( tp_catcher_task->m_step == 7 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器从机器手上接车(例如:搬运器移动到2号入口的上方,然后等待机器手把车放到中跑车上,小跑车保持松夹杆状态)
Error_manager Dispatch_process::excute_carrier_receive_car_from_robot()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR )
		{
			if ( tp_carrier_task->m_request_clamp_motion == Carrier_task::Clamp_motion::E_CLAMP_LOOSE &&
				 Common_data::approximate_difference(m_wheel_base, tp_carrier->m_actual_y1-tp_carrier->m_actual_y2, DISPATCH_DEFAULT_DIFFERENCE))
			{
				tp_carrier_task->m_step +=2;
			}
			else
			{
				carrier_adjust_to_ready(tp_carrier, tp_carrier_task, tp_dispatch_coordinates);
				tp_carrier_task->m_step++;
			}
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "tp_carrier->m_actual_load_status != Dispatch_device_base::Load_status::NO_CAR fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//让小跑车回到中跑车上
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_y, tp_dispatch_coordinates->m_carrier_default_y_back, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器把车存到停车位上(例如:小跑车夹车后,搬运器移动到56号停车位,然后小跑车将车存入车位,之后搬运器退回至电梯井)
Error_manager Dispatch_process::excute_carrier_store_car_to_parkingspace()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_catcher_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态(注注注注注意了, 调试阶段是无车, 真实环境是有车的)
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR &&
			 tp_carrier->m_actual_clamp_motion1 == Dispatch_device_base::Clamp_motion::E_CLAMP_LOOSE)
		{
			//检测正常, 直接跳过即可
			tp_carrier_task->m_step +=2;
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_carrier_store_car_to_parkingspace() fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//修正轴距
	{
		float temp_wheel_base = tp_carrier->m_actual_y1 - tp_carrier->m_actual_y2;
		if ( Common_data::approximate_difference(m_wheel_base, temp_wheel_base, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_adjust_wheel_base(tp_carrier, tp_carrier_task, tp_dispatch_coordinates);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让小跑车 夹车
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 16 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 17 )//小跑车 进入车位
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_leave);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 18 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 19 )//小跑车 松开夹杆
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_LOOSE);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 20 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 21 )//小跑车 回到中跑车
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 22 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 23 )//让中跑车回到电梯井
	{
		if ( mp_carrier->get_device_id() == 0 )
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
			tp_carrier_task->m_step++;
		}
		else if ( mp_carrier->get_device_id() == 1 )
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
			tp_carrier_task->m_step++;
		}
		else
		{
			return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
								 " m_destination_coordinates.z PARAMRTER ERROR ");
		}
	}
	if ( tp_carrier_task->m_step == 24 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 25 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 26 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 27 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器把车存到停车位上(例如:小跑车夹车后,搬运器移动到56号停车位,然后小跑车将车存入车位,之后搬运器退回至56车位外面即可)
Error_manager Dispatch_process::excute_carrier_store_car_to_parkingspace_ex()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_carrier_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态(注注注注注意了, 调试阶段是无车, 真实环境是有车的)
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR &&
			 tp_carrier->m_actual_clamp_motion1 == Dispatch_device_base::Clamp_motion::E_CLAMP_LOOSE)
		{
			//检测正常, 直接跳过即可
			tp_carrier_task->m_step +=2;
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "Dispatch_process::excute_carrier_store_car_to_parkingspace() fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//修正轴距
	{
		float temp_wheel_base = tp_carrier->m_actual_y1 - tp_carrier->m_actual_y2;
		if ( Common_data::approximate_difference(m_wheel_base, temp_wheel_base, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_adjust_wheel_base(tp_carrier, tp_carrier_task, tp_dispatch_coordinates);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让小跑车 夹车
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 16 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 17 )//小跑车 进入车位
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_leave);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 18 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 19 )//小跑车 松开夹杆
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_LOOSE);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 20 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 21 )//小跑车 回到中跑车
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 22 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 23 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器从停车位上取车(例如:搬运器移动到56号停车位,然后小跑车将车从车位取出,之后搬运器退回至电梯井)
Error_manager Dispatch_process::excute_carrier_pickup_car_from_parkingspace()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_carrier_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR )
		{
			if ( tp_carrier_task->m_request_clamp_motion == Carrier_task::Clamp_motion::E_CLAMP_LOOSE &&
				 Common_data::approximate_difference(m_wheel_base, tp_carrier->m_actual_y1-tp_carrier->m_actual_y2, DISPATCH_DEFAULT_DIFFERENCE))
			{
				tp_carrier_task->m_step +=2;
			}
			else
			{
				carrier_adjust_to_ready(tp_carrier, tp_carrier_task, tp_dispatch_coordinates);
				tp_carrier_task->m_step++;
			}
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "tp_carrier->m_actual_load_status != Dispatch_device_base::Load_status::NO_CAR fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//让小跑车回到中跑车上
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_y, tp_dispatch_coordinates->m_carrier_default_y_back, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )//小跑车 进入车位
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_leave);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 16 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 17 )//小跑车 夹车
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 18 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 19 )//小跑车 回到中跑车
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 20 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 21 )//让中跑车回到电梯井
	{
		if ( mp_carrier->get_device_id() == 0 )
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
			tp_carrier_task->m_step++;
		}
		else if ( mp_carrier->get_device_id() == 1 )
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
			tp_carrier_task->m_step++;
		}
		else
		{
			return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
								 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
		}
	}
	if ( tp_carrier_task->m_step == 22 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 23 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 24 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 25 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器从停车位上取车(例如:搬运器移动到56号停车位,然后小跑车将车从车位取出,之后搬运器退回至56车位外面即可)
Error_manager Dispatch_process::excute_carrier_pickup_car_from_parkingspace_ex()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_carrier_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::NO_CAR )
		{
			if ( tp_carrier_task->m_request_clamp_motion == Carrier_task::Clamp_motion::E_CLAMP_LOOSE &&
				 Common_data::approximate_difference(m_wheel_base, tp_carrier->m_actual_y1-tp_carrier->m_actual_y2, DISPATCH_DEFAULT_DIFFERENCE))
			{
				tp_carrier_task->m_step +=2;
			}
			else
			{
				carrier_adjust_to_ready(tp_carrier, tp_carrier_task, tp_dispatch_coordinates);
				tp_carrier_task->m_step++;
			}
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "tp_carrier->m_actual_load_status != Dispatch_device_base::Load_status::NO_CAR fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//让小跑车回到中跑车上
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_y, tp_dispatch_coordinates->m_carrier_default_y_back, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )//小跑车 进入车位
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_leave);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 16 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 17 )//小跑车 夹车
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_TIGHT);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 18 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 19 )//小跑车 回到中跑车
	{
		carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 20 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 21 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器把车交付给机器手(例如:搬运器移动到3号入口的上方,小跑车松夹杆,然后等待机器手把车从中跑车上取走)
Error_manager Dispatch_process::excute_carrier_deliver_car_to_robot()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_carrier_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//检查姿态
	{
		//检查姿态
		if ( tp_carrier->m_actual_load_status == Dispatch_device_base::Load_status::HAVE_CAR &&
			 tp_carrier->m_actual_clamp_motion1 == Dispatch_device_base::Clamp_motion::E_CLAMP_TIGHT)
		{
			//检测正常, 直接跳过
			tp_carrier_task->m_step +=2;
		}
		else
		{
			return Error_manager(Error_code::CARRIER_POSE_ERROR, Error_level::MINOR_ERROR,
								 "tp_carrier->m_actual_load_status != Dispatch_device_base::Load_status::NO_CAR fun error ");
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//让小跑车回到中跑车上
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_y, tp_dispatch_coordinates->m_carrier_default_y_back, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 14 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 15 )//小跑车 松开夹杆
	{
		carrier_move_c(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Clamp_motion::E_CLAMP_LOOSE);
		tp_carrier_task->m_step++;
	}
	if ( tp_carrier_task->m_step == 16 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 17 )
	{
		return Error_code::SUCCESS;
	}
}
//搬运器的自由移动(可以提前到2楼来准备接车,或者为了避让就退回至电梯井)(小跑车不进行取车和存车)
Error_manager Dispatch_process::excute_carrier_move()
{
	Error_manager t_error;
	Carrier * tp_carrier = NULL;
	Carrier_task * tp_carrier_task = NULL;
	Dispatch_coordinates * tp_dispatch_coordinates = Dispatch_coordinates::get_instance_pointer();

	if ( mp_carrier.get() == NULL || mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::excute_robot_catch_car_from_inlet()  POINTER IS NULL ");
	}
	else
	{
		tp_carrier = (Carrier *)mp_carrier.get();
		tp_carrier_task = (Carrier_task *)mp_carrier_task.get();
	}
//	std::cout << " huli test :::: " << " tp_carrier_task->m_step = " << tp_carrier_task->m_step << std::endl;
//	getchar();
	if ( tp_carrier_task->m_step == 0 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 1 )//让小跑车回到中跑车上
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_y, tp_dispatch_coordinates->m_carrier_default_y_back, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_y(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_y_back);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 2 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 3 )//让中跑车回到电梯井
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			if ( mp_carrier->get_device_id() == 0 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_left);
				tp_carrier_task->m_step++;
			}
			else if ( mp_carrier->get_device_id() == 1 )
			{
				carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, tp_dispatch_coordinates->m_carrier_default_x_right);
				tp_carrier_task->m_step++;
			}
			else
			{
				return Error_manager(Error_code::CARRIER_CONRTOL_PARAMETER_ERROR, Error_level::MINOR_ERROR,
									 " m_destination_coordinates_carrier.z PARAMRTER ERROR ");
			}
		}
	}
	if ( tp_carrier_task->m_step == 4 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 5 )//收回对接，之后中跑车固定在电梯上不能X轴移动，电梯可以Z轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_TAKE_BACK);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 6 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 7 )//电梯移动到对应的楼层
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_z, m_destination_coordinates_carrier.z, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_z(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.z);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 8 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 9 )//伸出对接，之后中跑车可以x轴移动，电梯不能Z轴移动
	{
		if ( tp_carrier->m_actual_joint_motion_x1 == Dispatch_device_base::Joint_motion::E_JOINT_TAKE_BACK )
		{
			carrier_joint_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, Carrier_task::Joint_motion::E_JOINT_HOLD_OUT);
			tp_carrier_task->m_step++;
		}
		else
		{
			tp_carrier_task->m_step +=2;
		}
	}
	if ( tp_carrier_task->m_step == 10 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 11 )//中跑车 x轴移动
	{
		if ( Common_data::approximate_difference(tp_carrier->m_actual_x, m_destination_coordinates_carrier.x, DISPATCH_DEFAULT_DIFFERENCE) )
		{
			tp_carrier_task->m_step +=2;
		}
		else
		{
			carrier_move_x(tp_carrier, tp_carrier_task, tp_dispatch_coordinates, m_destination_coordinates_carrier.x);
			tp_carrier_task->m_step++;
		}
	}
	if ( tp_carrier_task->m_step == 12 )
	{
		return check_task_ex(mp_carrier_task, tp_carrier_task->m_step);
	}
	if ( tp_carrier_task->m_step == 13 )
	{
		return Error_code::SUCCESS;
	}
}

//执行通道口动作
Error_manager Dispatch_process::excute_passageway_motion()
{
	return Error_code::SUCCESS;
}






//检查机器手任务单
Error_manager Dispatch_process::check_catcher_task()
{
	if ( mp_catcher_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::check_catcher_task  POINTER IS NULL ");
	}
	else
	{
		Catcher_task * tp_catcher_task = (Catcher_task *)mp_catcher_task.get();

		if ( tp_catcher_task->get_task_statu() == Task_Base::Task_statu::TASK_OVER )
		{
			return Error_code::SUCCESS;
		}
		else if ( tp_catcher_task->get_task_statu() == Task_Base::Task_statu::TASK_ERROR )
		{
			return tp_catcher_task->get_task_error_manager();
		}
		else if ( tp_catcher_task->get_task_statu() == Task_Base::Task_statu::TASK_WORKING &&
				  tp_catcher_task->get_task_statu() == Task_Base::Task_statu::TASK_SIGNED &&
				  tp_catcher_task->get_task_statu() == Task_Base::Task_statu::TASK_CREATED)
		{
			return Error_code::NODATA;
		}
	}
}
//检查搬运器任务单
Error_manager Dispatch_process::check_carrier_task()
{
	if ( mp_carrier_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::check_carrier_task  POINTER IS NULL ");
	}
	else
	{
		Catcher_task * tp_carrier_task = (Catcher_task *)mp_carrier_task.get();

		if ( tp_carrier_task->get_task_statu() == Task_Base::Task_statu::TASK_OVER )
		{
			return Error_code::SUCCESS;
		}
		else if ( tp_carrier_task->get_task_statu() == Task_Base::Task_statu::TASK_ERROR )
		{
			return tp_carrier_task->get_task_error_manager();
		}
		else if ( tp_carrier_task->get_task_statu() == Task_Base::Task_statu::TASK_WORKING &&
				  tp_carrier_task->get_task_statu() == Task_Base::Task_statu::TASK_SIGNED &&
				  tp_carrier_task->get_task_statu() == Task_Base::Task_statu::TASK_CREATED)
		{
			return Error_code::NODATA;
		}
	}
}
//检查通道口任务单
Error_manager Dispatch_process::check_passageway_task()
{
	if ( mp_passageway_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::check_passageway_task  POINTER IS NULL ");
	}
	else
	{
		Catcher_task * tp_passageway_task = (Catcher_task *)mp_passageway_task.get();

		if ( tp_passageway_task->get_task_statu() == Task_Base::Task_statu::TASK_OVER )
		{
			return Error_code::SUCCESS;
		}
		else if ( tp_passageway_task->get_task_statu() == Task_Base::Task_statu::TASK_ERROR )
		{
			return tp_passageway_task->get_task_error_manager();
		}
		else if ( tp_passageway_task->get_task_statu() == Task_Base::Task_statu::TASK_WORKING &&
				  tp_passageway_task->get_task_statu() == Task_Base::Task_statu::TASK_SIGNED &&
				  tp_passageway_task->get_task_statu() == Task_Base::Task_statu::TASK_CREATED)
		{
			return Error_code::NODATA;
		}
	}
}

//检查 任务单 是否完成任务, 里面会调整短步骤
Error_manager Dispatch_process::check_task_ex(std::shared_ptr<Task_Base> p_task, int& step)
{
	if ( p_task.get() == NULL )
	{
		return Error_manager(Error_code::POINTER_IS_NULL, Error_level::MINOR_ERROR,
							 "Dispatch_process::check_passageway_task  POINTER IS NULL ");
	}
	else
	{
		std::cout << " huli test :::: " << " ffffffffffffffffffffffffffffffffffffffffffffffffffffff = " << 333 << std::endl;
		std::cout << " huli test :::: " << " p_task->get_task_statu() = " << p_task->get_task_statu() << std::endl;
		std::cout << " huli test :::: " << " gggggggggggggggggggggggggggggggggggggggggggggggggggggg = " << 333 << std::endl;


		if ( p_task->get_task_statu() == Task_Base::Task_statu::TASK_OVER )
		{
			step++;
			return Error_code::NODATA;	//这里返回nodata 表示任务继续下一步
		}
		else if ( p_task->get_task_statu() == Task_Base::Task_statu::TASK_ERROR )
		{
			step = 0;
			return p_task->get_task_error_manager();
		}
		else if ( p_task->get_task_statu() == Task_Base::Task_statu::TASK_WORKING ||
		p_task->get_task_statu() == Task_Base::Task_statu::TASK_SIGNED ||
		p_task->get_task_statu() == Task_Base::Task_statu::TASK_CREATED)
		{
			//继续等待任务, 直到状态改变
			return Error_code::NODATA;
		}
		else
		{
			LOG(INFO) << "Dispatch_process::check_task_ex failed p_catcher_task->get_task_statu() =  "<< p_task->get_task_statu() << "   " << this;
			return Error_code::NODATA;
		}
	}
}

//机器手调整到正常待机的姿态(调节夹杆和轴距)
Error_manager Dispatch_process::catcher_adjust_to_ready(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//调整姿态
	tp_catcher_task->m_request_clamp_motion = Catcher_task::Clamp_motion::E_CLAMP_LOOSE;
	tp_catcher_task->m_request_d1 = tp_dispatch_coordinates->m_catcher_d1_min;
	tp_catcher_task->m_request_d2 = tp_dispatch_coordinates->m_catcher_d2_min;
	if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
	{
		tp_catcher_task->m_request_b = 270;
	}
	else
	{
		tp_catcher_task->m_request_b = 90;
	}

	std::cout << " huli test :::: " << " catcher_adjust_to_ready = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_to_ready = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_clamp_motion = " << tp_catcher_task->m_request_clamp_motion << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d1 = " << tp_catcher_task->m_request_d1 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d2 = " << tp_catcher_task->m_request_d2 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_catcher_direction = " << tp_catcher->m_catcher_direction << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_b = " << tp_catcher_task->m_request_b << std::endl;

	return Error_code::SUCCESS;
}

//机器手 移动z
Error_manager Dispatch_process::catcher_move_z(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates, float target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//机器手 移动z
	tp_catcher_task->m_request_z = target;

	std::cout << " huli test :::: " << " catcher_move_z = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_move_z = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_z = " << tp_catcher_task->m_request_z << std::endl;

	return Error_code::SUCCESS;
}

//机器手调整到 准备从地面抓车前的姿态
Error_manager Dispatch_process::catcher_adjust_from_ground(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//机器手 调整x y b d1 d2, 根据感测模块的定位信息, 调整机器手的姿态, 准备抓车.
	tp_catcher_task->m_request_x = m_car_measure_information.center_x;
	tp_catcher_task->m_request_y = m_car_measure_information.center_y;
	if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
	{
		//机器手如果旋转反向, 那就+180即可, 没有必要旋转归位.
		tp_catcher_task->m_request_b = 180 + m_car_measure_information.car_angle;
	}
	else
	{
		tp_catcher_task->m_request_b = m_car_measure_information.car_angle;
	}
	//限制轮距, 在夹车杆松开时, 机器人下降时, 轴距不能超过3000mm, 必须下降到最下面才能调整轴距, 夹车后可以上升.
	if ( m_wheel_base > tp_dispatch_coordinates->m_catcher_wheel_base_limit )
	{
		tp_catcher_task->m_request_d1 = (tp_dispatch_coordinates->m_catcher_wheel_base_limit - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_d2 = (tp_dispatch_coordinates->m_catcher_wheel_base_limit - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_wheelbase = tp_dispatch_coordinates->m_catcher_wheel_base_limit;
	}
	else
	{
		tp_catcher_task->m_request_d1 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_d2 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_wheelbase = m_wheel_base;
	}
	tp_catcher_task->m_request_clamp_motion = Catcher_task::Clamp_motion::E_CLAMP_LOOSE;

	std::cout << " huli test :::: " << " catcher_adjust_from_ground = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_from_ground = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_x = " << tp_catcher_task->m_request_x << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_y = " << tp_catcher_task->m_request_y << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_catcher_direction = " << tp_catcher->m_catcher_direction << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_b = " << tp_catcher_task->m_request_b << std::endl;
	std::cout << " huli test :::: " << " m_wheel_base = " << m_wheel_base << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d1 = " << tp_catcher_task->m_request_d1 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d2 = " << tp_catcher_task->m_request_d2 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_wheelbase = " << tp_catcher_task->m_request_wheelbase << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_clamp_motion = " << tp_catcher_task->m_request_clamp_motion << std::endl;


	return Error_code::SUCCESS;
}

//机器手 修正轴距, 如果轴距大于3000mm, 那么就要修正轴距.
Error_manager Dispatch_process::catcher_adjust_wheel_base(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);

	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);
	//修正轴距
	tp_catcher_task->m_request_d1 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
	tp_catcher_task->m_request_d2 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
	tp_catcher_task->m_request_wheelbase = m_wheel_base;

	std::cout << " huli test :::: " << " catcher_adjust_wheel_base = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_wheel_base = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d1 = " << tp_catcher_task->m_request_d1 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d2 = " << tp_catcher_task->m_request_d2 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_wheelbase = " << tp_catcher_task->m_request_wheelbase << std::endl;

	return Error_code::SUCCESS;
}

//机器手 移动c轴 夹杆
Error_manager Dispatch_process::catcher_move_c(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates, Catcher_task::Clamp_motion target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_catcher_task->m_request_clamp_motion = target;

	std::cout << " huli test :::: " << " catcher_move_c = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_move_c = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_clamp_motion = " << tp_catcher_task->m_request_clamp_motion << std::endl;

	return Error_code::SUCCESS;
}

//机器手调整到 准备把车放到搬运器的姿态
Error_manager Dispatch_process::catcher_adjust_to_carrier(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates, bool reverse_flag)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//机器手 调整x y b d1 d2, 调整机器手的姿态, 准备把车放置到中跑车上.
	tp_catcher_task->m_request_x = m_destination_coordinates_catcher.x;
	tp_catcher_task->m_request_y = tp_dispatch_coordinates->m_carrier_default_y1_back - (m_wheel_base /2);
	//存车需要反向, 取车不需要
	if ( reverse_flag )
	{
		if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
		{
			tp_catcher_task->m_request_b = 90;
		}
		else
		{
			tp_catcher_task->m_request_b = 270;
		}
	}
	else
	{
		if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
		{
			tp_catcher_task->m_request_b = 270;
		}
		else
		{
			tp_catcher_task->m_request_b = 90;
		}
	}

	std::cout << " huli test :::: " << " catcher_adjust_to_carrier = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_to_carrier = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_x = " << tp_catcher_task->m_request_x << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_y = " << tp_catcher_task->m_request_y << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_catcher_direction = " << tp_catcher->m_catcher_direction << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_request_b = " << tp_catcher->m_request_b << std::endl;

	return Error_code::SUCCESS;
}

//机器手调整到 准备把车放到地面的姿态
Error_manager Dispatch_process::catcher_adjust_to_ground(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//机器手 调整x y b d1 d2, 调整机器手的姿态, 准备把车放置到中跑车上.
	tp_catcher_task->m_request_x = m_destination_coordinates_catcher.x;
	tp_catcher_task->m_request_y = m_destination_coordinates_catcher.y;
	if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
	{
		tp_catcher_task->m_request_b = 270;
	}
	else
	{
		tp_catcher_task->m_request_b = 90;
	}

	std::cout << " huli test :::: " << " catcher_adjust_to_ground = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_to_ground = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_x = " << tp_catcher_task->m_request_x << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_y = " << tp_catcher_task->m_request_y << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_catcher_direction = " << tp_catcher->m_catcher_direction << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_request_b = " << tp_catcher->m_request_b << std::endl;

	return Error_code::SUCCESS;
}

//机器手调整到 对接搬运器的姿态
Error_manager Dispatch_process::catcher_adjust_from_carrier(Catcher * tp_catcher, Catcher_task * tp_catcher_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_catcher_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_catcher.command_key().c_str(), m_dispatch_control_request_msg_catcher.dispatch_task_type(), tp_catcher_task->m_step);
	tp_catcher_task->m_request_key = t_key;
	tp_catcher_task->set_task_statu(Task_Base::TASK_CREATED);

	//机器手 调整x y b d1 d2, 调整机器手的姿态, 准备把车放置到中跑车上.
	tp_catcher_task->m_request_x = m_destination_coordinates_catcher.x;
	tp_catcher_task->m_request_y = tp_dispatch_coordinates->m_carrier_default_y1_back - (m_wheel_base /2);

	if ( tp_catcher->m_catcher_direction == Dispatch_device_base::Catcher_direction::CATCHER_DIRECTION_NEGATIVE )
	{
		tp_catcher_task->m_request_b = 270;
	}
	else
	{
		tp_catcher_task->m_request_b = 90;
	}

	//限制轮距, 在夹车杆松开时, 机器人下降时, 轴距不能超过3000mm, 必须下降到最下面才能调整轴距, 夹车后可以上升.
	if ( m_wheel_base > tp_dispatch_coordinates->m_catcher_wheel_base_limit )
	{
		tp_catcher_task->m_request_d1 = (tp_dispatch_coordinates->m_catcher_wheel_base_limit - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_d2 = (tp_dispatch_coordinates->m_catcher_wheel_base_limit - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_wheelbase = tp_dispatch_coordinates->m_catcher_wheel_base_limit;
	}
	else
	{
		tp_catcher_task->m_request_d1 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_d2 = (m_wheel_base - tp_dispatch_coordinates->m_catcher_d1_d2_distance)/2;
		tp_catcher_task->m_request_wheelbase = m_wheel_base;
	}
	tp_catcher_task->m_request_clamp_motion = Catcher_task::Clamp_motion::E_CLAMP_LOOSE;

	std::cout << " huli test :::: " << " catcher_adjust_from_carrier = " << tp_catcher_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " catcher_adjust_from_carrier = " << tp_catcher_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_x = " << tp_catcher_task->m_request_x << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_y = " << tp_catcher_task->m_request_y << std::endl;
	std::cout << " huli test :::: " << " tp_catcher->m_catcher_direction = " << tp_catcher->m_catcher_direction << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_b = " << tp_catcher_task->m_request_b << std::endl;
	std::cout << " huli test :::: " << " m_wheel_base = " << m_wheel_base << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d1 = " << tp_catcher_task->m_request_d1 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_d2 = " << tp_catcher_task->m_request_d2 << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_wheelbase = " << tp_catcher_task->m_request_wheelbase << std::endl;
	std::cout << " huli test :::: " << " tp_catcher_task->m_request_clamp_motion = " << tp_catcher_task->m_request_clamp_motion << std::endl;

	return Error_code::SUCCESS;
}


//搬运器调整到 正常待机的姿态(调节夹杆和轴距)
Error_manager Dispatch_process::carrier_adjust_to_ready(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_clamp_motion = Carrier_task::Clamp_motion::E_CLAMP_LOOSE;
	tp_carrier_task->m_request_wheelbase = m_wheel_base;
	tp_carrier_task->m_request_y1 = tp_carrier->m_actual_y + tp_dispatch_coordinates->m_carrier_y_y1_distance;
	tp_carrier_task->m_request_y2 = tp_carrier_task->m_request_y1 - tp_carrier_task->m_request_wheelbase;

	std::cout << " huli test :::: " << " carrier_adjust_to_ready = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_adjust_to_ready = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_wheelbase = " << tp_carrier_task->m_request_wheelbase << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y1 = " << tp_carrier_task->m_request_y1 << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y2 = " << tp_carrier_task->m_request_y2 << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_clamp_motion = " << tp_carrier_task->m_request_clamp_motion << std::endl;

	return Error_code::SUCCESS;
}

//搬运器 移动x
Error_manager Dispatch_process::carrier_move_x(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates, float target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_x = target;

	std::cout << " huli test :::: " << " carrier_move_x = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_move_x = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_x = " << tp_carrier_task->m_request_x << std::endl;

	return Error_code::SUCCESS;
}

//搬运器 移动y
Error_manager Dispatch_process::carrier_move_y(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates, float target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_y = target;
	tp_carrier_task->m_request_wheelbase = m_wheel_base;
	tp_carrier_task->m_request_y1 = tp_carrier_task->m_request_y + tp_dispatch_coordinates->m_carrier_y_y1_distance;
	tp_carrier_task->m_request_y2 = tp_carrier_task->m_request_y1 - tp_carrier_task->m_request_wheelbase;

	std::cout << " huli test :::: " << " carrier_move_y = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_move_y = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y = " << tp_carrier_task->m_request_y << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_wheelbase = " << tp_carrier_task->m_request_wheelbase << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y1 = " << tp_carrier_task->m_request_y1 << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y2 = " << tp_carrier_task->m_request_y2 << std::endl;

	return Error_code::SUCCESS;
}

//搬运器 移动z
Error_manager Dispatch_process::carrier_move_z(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates, float target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_z = target;

	std::cout << " huli test :::: " << " carrier_move_z = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_move_z = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_z = " << tp_carrier_task->m_request_z << std::endl;

	return Error_code::SUCCESS;
}
//搬运器 移动c轴 夹车杆
Error_manager Dispatch_process::carrier_move_c(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates, Carrier_task::Clamp_motion target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_clamp_motion = target;

	std::cout << " huli test :::: " << " carrier_move_c = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_move_c = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_clamp_motion = " << tp_carrier_task->m_request_clamp_motion << std::endl;

	return Error_code::SUCCESS;
}
//搬运器调整 水平的交接
Error_manager Dispatch_process::carrier_joint_x(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates, Carrier_task::Joint_motion target)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_joint_motion_x = target;

	std::cout << " huli test :::: " << " carrier_joint_x = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_joint_x = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_joint_motion_x = " << tp_carrier_task->m_request_joint_motion_x << std::endl;

	return Error_code::SUCCESS;
}

//搬运器 修正轴距
Error_manager Dispatch_process::carrier_adjust_wheel_base(Carrier * tp_carrier, Carrier_task * tp_carrier_task, Dispatch_coordinates * tp_dispatch_coordinates)
{
	std::unique_lock<std::mutex> t_lock1(m_lock);
	std::unique_lock<std::mutex> t_lock2(tp_carrier_task->m_lock);
	char t_key[50] = {0};
	sprintf(t_key, "%s+%d+%d", m_dispatch_control_request_msg_carrier.command_key().c_str(), m_dispatch_control_request_msg_carrier.dispatch_task_type(), tp_carrier_task->m_step);
	tp_carrier_task->m_request_key = t_key;
	tp_carrier_task->set_task_statu(Task_Base::TASK_CREATED);

	tp_carrier_task->m_request_wheelbase = m_wheel_base;
	tp_carrier_task->m_request_y1 = tp_carrier->m_actual_y + tp_dispatch_coordinates->m_carrier_y_y1_distance;
	tp_carrier_task->m_request_y2 = tp_carrier_task->m_request_y1 - tp_carrier_task->m_request_wheelbase;

	std::cout << " huli test :::: " << " carrier_adjust_wheel_base = " << tp_carrier_task->m_request_key << std::endl;
	std::cout << " huli test :::: " << " carrier_adjust_wheel_base = " << tp_carrier_task->m_respons_key << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_wheelbase = " << tp_carrier_task->m_request_wheelbase << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y1 = " << tp_carrier_task->m_request_y1 << std::endl;
	std::cout << " huli test :::: " << " tp_carrier_task->m_request_y2 = " << tp_carrier_task->m_request_y2 << std::endl;

	return Error_code::SUCCESS;
}